Blastrac BDC317P, Руководство пользователя

Страница: 34 / 48

MODEL BDC317P DUST COLLECTOR
OPERATING MANUAL
APRIL 2008
SECTION 7
MAINTENANCE
34
Dust Collectors
7.2 MAINTENANCE AND INSPECTION LIST
Operating hours/time period Inspection points,
maintenance instructions
12 hours after repairing Check all safety devices are working
adequately.
Check all accessible screw connections for
tight seat.
Daily and prior to starting work Check the hose connections for tightness and
fixed seat.
Check the hose to the filter for damage.
Make sure that the dust bin of the filter is
emptied.
Check the electric connections for sediments
of dirt or foreign bodies.
Check the electric motors for dirt and other
contaminants.
Check compressor oil level.
Annually Full overhaul and cleaning of the complete
dust collector.
7.3 REPAIRING
As already mentioned in section 5 “Initial operation,” we recommend conducting
initial repair work on the machine with the support of Blastrac personnel. By
taking this advice, maintenance personnel get the opportunity to be trained by an
expert on the machine.
We will describe only regular maintenance work that could occur within the
bounds of regular maintenance or work that is required to replace wear parts.
If parts or components are to be replaced, the following sequence of
maintenance must be followed.
You should also stock all spare or wear parts that cannot be supplied quickly. As
a rule, production standstill periods are more expensive than the cost for the
corresponding spare part.
Any fasteners that have been removed must be replaced with those of the same
quality (strength, material) and design.