MODEL BDC317P DUST COLLECTOR
OPERATING MANUAL
APRIL 2008
SECTION 7
MAINTENANCE
39
Dust Collectors
The waste oil must be collected and disposed of according to the
local environmental regulations.
If the suction filter has been cleaned many times, there is a
chance that it won’t work properly. In that case, you need to
replace the filter.
The oil must be changed after the first 50 working hours.
The oil has to be changed every 200 working hours or at least one time per year.
If the oil contains condensation (water), because of the adverse working
conditions, you will need to change the oil immediately. This can be checked by
viewing the oil-level glass. If you notice a milky color, the oil must be changed.
Fill with motor oil with a viscosity index VG30 according to the appropriate ASTM
standards or European standard DIN 51 562, as appropriate.
Switch off the dust collector and then unplug the mains plug. Ensure the
equipment is in the Safety off position.
Make available an oil pan.
Loosen the waste oil screw (3) to drain the oil into the oil pan.
Clean the crankcase with a little quantity of new oil.
Fit the waste oil screw (3) again.
Fill with new oil.
Clean and replace the suction filter
The replaceable filter element (2) is made of foamed material. If dust falls on the
filter element, you must clean it immediately.
Every 50 hours, the suction filter has to be cleaned with air pressure.
There is a risk of burn if you touch hot oil or hot components.
Содержание BDC317P
Страница 20: ...MODEL BDC317P DUST COLLECTOR OPERATING MANUAL APRIL 2008 SECTION 3 OPERATING MANUAL 20 Dust Collectors Notes ...
Страница 27: ...MODEL BDC317P DUST COLLECTOR OPERATING MANUAL APRIL 2008 SECTION 5 INITIAL OPERATION 27 Dust Collectors Notes ...
Страница 41: ...MODEL BDC317P DUST COLLECTOR OPERATING MANUAL APRIL 2008 SECTION 8 ELECTRICAL SYSTEMS 41 Dust Collectors ...