Blastrac BDC317P, Руководство пользователя

Страница: 25 / 48

MODEL BDC317P DUST COLLECTOR
OPERATING MANUAL
APRIL 2008
SECTION 5
INITIAL OPERATION
25
Dust Collectors
Before start-up the operating personnel must be familiar with the
safety regulations given in this manual.
5.1 PREPARATION FOR INITIAL OPERATION
Before switching on, make sure that all existing protective housings are mounted
and that the dust collector is connected correctly.
Handle all plugs, cables, hoses and operating devices with care. Avoid any
contact with live wires.
Work on the electrical system must only be carried out by qualified specialists.
Regular inspection is important in order to avoid unplanned downtimes of your
dust collector. Carry out the following checks before any start-up:

Check whether all dust collector parts are assembled safely and correctly.

Check all screws and other fasteners for a tight seat.

Check the tightness of the hose connections and the condition of the hose
to the filter.

Check the electrical connections for dirt and foreign body deposits.

Check the electrical motors for dirt and other contaminants.

Check the main power cable and the dust hose for damage. Replace or
repair all damaged parts before starting the machine.

Connect the Blastrac dust collector and the Blastrac machine collector
with the dust hose. Use hose clamps at the connections.

Check that the dust container of the dust collector is empty.