Blastrac 125 BDC1216, Инструкция по эксплуатации

Страница: 15 / 56

-3-
GB
125 BDC1216/BDC1324
General recommendations
DANGER !
- Risk of fi re outbreaks and explosions.
The vacuum cleaner can only be used when active
sources of ignition are not going to be vacuumed.
It is forbidden to vacuum the following materials:
burning materials (embers, hot ashes, lighted
cigarettes, etc.), fl ammable liquids, aggressive
fuels (e.g. gasoline, solvents, acids, alkaline
solutions, etc.).
It is forbidden to vacuum the following materials:
explosive dust or dust liable to spontaneous
ignition (such as magnesium or aluminium dusts,
etc.).
The vacuum cleaner is not suitable for vacuuming
explosive or similar substances, as established
by the laws governing explosive substances,
particularly: liquid fuels and mixtures of fl ammable
dust and liquids.
DANGER !
Emergency
If an emergency situation occurs:
-
fi lter breakage
- fi re outbreak
- short circuit
- motor block
- electric shock
- etc...
turn off the vacuum cleaner, unplug it and ask for
assistance to be performed by qualifi ed personnel.
Note
Check the permissible substances.
DANGER !
The vacuum cleaners must not be used or stored
outdoors, or in damp places.
Vacuum cleaner description - Labels
See fi g. 1.
List of labels - fi g. 1
A - Identifi cation plate:
Code of the model, technical specifi cations, serial
number, CE marking, year of manufacture
B - Dust container
C - Latches
D - Handle
E - Inlet
F - Outlet
G - Attention plate
Draws the operator’s attention to the fact that
the fi lter must be shaken only when the vacuum
cleaner is off (see par. “Shaking the primary fi lter”
as well).
H - Panel power plate
Indicates that the panel is powered by the voltage
indicated on the data plate.
I - Warning plate
Indicates that the machine can not be disposed of
with other domestic waste at the end of its cycle of
life (see “Vacuum cleaner disposal”).
L - Attention plate for using the vacuum cleaner
M - Warning plate for not vacuuming combustible or
hazardous materials
N - Model plate
This vacuum cleaner creates a strong airfl ow which is
drawn in through the inlet “E” and blows out through
the outlet “F”.
The hose “A” (Fig. 5) must be fi tted directly into the
union supplied with the vacuum cleaner.
Before turning on the vacuum cleaner, fi t the vacuum
hose into the inlet and then fi t the required tool on to
the end part (refer to the manufacturer's accessory
catalogue or Service Centre).
The diameters of the authorized hoses are given in the
technical specifi cations table.
This vacuum cleaner is equipped with an internal baffl e
plate which subjects the vacuumed substances to a
circular centrifugal movement that makes them drop
into the container.
The vacuum cleaner is equipped with a primary
fi lter which enables it to be used for the majority of
applications.