Blastrac 125 BDC1216, Инструкция по эксплуатации

Страница: 16 / 56

125 BDC1216/BDC1324
-4-
Optional kits
On request, the vacuum cleaner can be supplied with
optional kits already installed. However, they can also
be installed at a later date.
The following optional kit is available for converting the
vacuum cleaner:
-
Absolute fi lter “H” kit (CFM code 5 60357).
Please contact the manufacturer's sales network for
further details.
Instructions describing how to fi t the optional kits and
the relative operation and maintenance manuals are
supplied together with the optional kits.
DANGER !
Use only genuine optional kits supplied and
authorized by the manufacturer.
Accessories
Various accessories are available; refer to the
manufacturer's accessory catalogue.
DANGER !
Use only genuine optional kits supplied and
authorized by the manufacturer.
Packing and unpacking
Dispose of the packing materials in compliance with
the laws in force.
Cardboard box packing (fi g. 2)
Model
125
BDC1216
BDC1324
A (mm) 680 680
B (mm) 610 610
C (mm) 1,100 1,100
Weight with packing (kg) 40 41
Setting to work - connection to the power
supply
DANGER !
- Make sure that the vacuum cleaner is in
perfect condition before starting work.
- Before plugging the vacuum cleaner into the
electricity mains, make sure that the voltage
rating indicated on the data plate corresponds
to that of the electricity mains.
- Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
- Make sure that the vacuum cleaner is off.
- The plugs and connectors of the connection
cables must be protected against splashed
water.
- Make sure that connections to the electrical
mains and plug are correct.
- Use the vacuum cleaners only when the cables
that connect to the electrical mains are in
perfect condition (damaged cables could lead
to electric shocks!).
- Regularly check that the connection cable
does not show signs of damage, excessive
wear, cracks or ageing.
DANGER !
When the vacuum cleaner is operating, do not:
-
crush, pull, damage or step on the cable that
connects to the electricity mains;
- only disconnect the cable from the electrical
mains by removing the plug (do not pull the
cable).
- only replace the electric power cable with one
of the same type as the original; the same rule
applies if an extension is used.
- the cable must be replaced by the
manufacturer’s Service Centre staff or by
equivalent qualifi ed personnel.