BlastPro BP-9-110v, Руководство пользователя

Страница: 9 / 19

9
Safety — Maintenance Procedures
When performing maintenance on the BP-9-1 10V, make certain that the following safety
procedures are followed:

Verify that the BP-9-1 10V and the dust collector are not in operation. Attempting to
perform maintenance operations on the BP-9-1 10V or the dust collector while in
operation could lead to serious injury or death.

Verify that the BP-9-1 10V and the dust collector are on a level and stable surface.

Make certain that the BP-9-1 10V is in the Safety off position (valve is closed, blast
machine is switched off, dust collector is switched off, all drives are at a standstill,
and main plug has been pulled).

Make certain maintenance personnel are wearing lint-free cleaning cloths.

If repairing the underside of the BP-9- 11 0V, be certain to use jack stands. Never
work under equipment that is not properly blocked.
All repairs to electrical components, including wiring, should be performed by a
licensed electrician.

When performing electrical servicing work, make certain that all replacement
electrical components comply with the original parts and are correctly adjusted.

All other repairs must be completed by competent, qualified personnel.

Make certain that process materials and replaced parts are disposed of safely and
in an environmentally-appropriate manner.

FAILURE TO REPLACE LOOSE OR DAMAGED PARTS COULD CAUSE
DAMAGE TO THE EQUIPMENT AND/OR SERIOUS INJURY OR DEATH
TO THE OPERATOR!

Verify that abrasive cleaning products are not used.

MAKE CERTAIN TO NEVER WELD, FLAME CUT/TORCH, OR PERFORM
ANY GRINDINGWORK ON THE BP-9-110V WITHOUT WRITTEN
AUTHORIZATION FROM BLASTPRO MANUFACTURING, INC!

Make certain that electrical equipment is inspected regularly.

Verify that all screw connections that were undone during maintenance work are
retightened prior to putting the machine back into operation.

After performing maintenance operations on the BP-9-1 10V and dust collector, verify that
all safety labels, guards, control panels, housings, lids, seals, casters, magnets and other
parts that have been replaced are secure.