Blankom-Encoder-EN-V3-2019-RR.docx
- 47 -
RRI 26. Februar 2019
Safety instructions
Read the safety instructions carefully before assembling or commissioning the device and ensure that you comply with them
1.
Installation
Danger:
The device may
only
be installed and started up by competent people
(see EN 60065)
.
Danger:
The device and the peripheral distribution devices must be earthed properly (potential equalization) in accordance with
EN 60728-11 before
Commissioning
and remain earthed even when the device is dismantled.
Danger:
The device may not be installed on a flammable base
(risk of fire)
.
Danger:
Only connect the device to a socket that is installed correctly and connected to devices that has an earth conductor
(Depending on Model andUsage).
Danger:
Plan the assembly or installation location to ensure that children cannot play with the device and its connections.
There is a risk of electric shock
(Danger of death)
.
Danger:
Select an assembly or installation location in which fluids or objects cannot get into the device under any circumstances (e.g. condensation, water
for watering plants, etc.).
Danger:
Ventilation slots and refrigeration units are important function elements on the devices. If devices have refrigeration units or ventilation slots, you
must ensure that they are never covered or built over. Also ensure that there is sufficient air circulation around the device. This prevents possible damage to
the device and the
risk of fire due
to overheating. Ensure a minimum of
clearance of 20cm
between the device and other objects.
Danger:
The assembly or installation location must allow all connected cables to be laid safely. Cables and power supply cables must not be damaged or
crushed by any objects. Furthermore, ensure that cables are not laid in the immediate vicinity of sources of heat (e.g. radiators, other electrical devices,
fireplaces, etc.)
(Risk of fire)
,
(risk of electric shock danger of death)
Danger:
In order to prevent damage to the device, as well as possible subsequent damage
(risk of fire)
, devices intended for installation on the wall are only
permitted to be installed on a level surface and not
above head height
.
Warning:
(Only for optical transmitters and their peripheral distribution devices) Never look directly or indirectly into the laser beam. Only connect the
device to the power supply once all optical lines are connected securely.
Warning:
The safety regulations in the relevant current standards
EN 60728-11
and
EN 60065
must be complied with.
Warning:
Comply with all applicable national safety regulations and standards.
Warning:
The device's mains plug must be easily accessible at all times.
Warning:
Follow all instructions in the device-specific operating manual
2.
Operation
Danger:
The device is only permitted to be operated in dry rooms in a non-tropical climate. In damp rooms or outdoors, there is the risk of short circuits
(risk
of fire)
or electric shock
(danger of death)
.
Danger:
Do not insert any objects through the ventilation slot. Risk of electric shock
(danger of death)
.
Danger:
Do not put any containers filled with liquid (e.g. vases) on the device. There is a risk of electric shock
(danger of death)
or
(risk of fire)
.
Danger:
No open sources of fire such as burning candles are permitted to be placed on the device
(risk of fire)
.
Danger:
Ensure that there is a clearance of at least
20cm
around the device. The device ventilation is not permitted to be impaired by covering the
Ventilation openings with objects such as newspapers, tablecloths, curtains, etc.
(risk of fire)
.
Warning:
Follow all instructions in the device-specific operating manual.
3.
Maintenance
Danger:
Maintenance tasks must always be carried out by competent people
(see EN 60065)
.
Danger:
Do not carry out servicing work during thunderstorms. There is a risk of electric shock
(danger of death)
.
Warning:
(Only for devices with batteries):
Risk of explosion if
the battery is replaced improperly. Only replace with the same type!
Warning:
Batteries must not be subjected to excessive heat such as sunlight, fire or similar
(risk of explosion)
.
Warning:
Only use the manufacturer's accessories or accessories with identical technical properties.
Warning:
(For optical transmitters and their peripheral distribution devices) unplug the mains plug before dismantling the device.
4.
Repairs
• Danger:
The device may only be opened by competent people
(see EN 60065)
. Before opening the device, unplug the mains plug or disconnect the power
supply; otherwise there is a
danger of death!
The device is only permitted to be connected to the power and operated when the
mains adaptor cover is
installed
. This also applies when you clean the device or work on the connections.
Danger:
Repairs on the device may only be carried out by a specialist
(see EN 60065)
observing
the applicable VDE (German Association for Electrical,
Electronic & Information Technologies) guidelines
.
Danger:
Only use components of the same type and with identical technical properties for the repair. Otherwise, there is a risk of electric shock
(danger of
death)
and
risk of fire
.
Warning:
(For optical transmitters and their peripheral distribution devices) unplug the mains plug before dismantling the device.
If you have any queries regarding repairs, please contact our company service: E-mail:
[email protected], contact: www.blankom.de
5.
Sale
Caution:
If the device is sold, these safety instructions and the operating manual for the relevant device must be handed over to the purchaser.
6.
Disposal
Caution:
Dispose of the device in accordance with the applicable environmental regulations.
Caution:
Dispose of batteries (if present) in accordance with the applicable environmental regulations.
