Blankom-Encoder-EN-V3-2019-RR.docx
- 37 -
RRI 26. Februar 2019
WIFI SETTING HİNTS
Hint shown above: If you want to configure the HD encoder, you need to set the fixed IP of the computer first . See chapter above – similar to
Ethernet Settings.
HD WIRELESS ENCODER SETTINGS
Connect the HD Encoders by the network cable, then open the browser to enter the network setting chapter. Default setting as shown below can
be modified to your needs:
Note:
1)
Default IP of wifi can be 192.168.0.32 . When wifi connected successfully, you can access to web control panel by 192.168.0.32 .
2)
Wifi Encryption : WPA/WPA2 (Note: Some wireless routers have different encryption mode, please select WPA/WPA2 for the encryption )
3)
Input the WEP/WPA password string of the wireless router
