Blankom-Encoder-EN-V3-2019-RR.docx
- 17 -
RRI 26. Februar 2019
NETWORK SETTINGS - WIFI
You can set the network with either Ethernet or WIFI. Only devices
with WIFI support
can use a WLAN connection.
Instruction of wifi network Setup: 3 different settings can be chosen
A. Ethernet:
Only connected by ethernet (default configuration)
B. Wifi*:
Only connect with WLAN . Hint: If you entered the wrong password or SSID during WIFI mode will cause the
system being unable to connect to Wirelesss LAN. Opening the web-Interface will fail. Please press the reset button to
restore the default settings to solve the problem)
C. Auto:
Automatically detect if you have ethernet or wifi connected *.
*Only for devices equipped with WIFI!
a.
The Default IP of the device is 192.168.0.32 (depending on model) or 192.168.1.168 . If IP setting has been
forgotten after changing, you can RST= reset it to default IP following the reset to default settings procedure like
explained before.
Note: The Preview is only
possible if already
configured:
Popup will appear but please
set FLV or HLS streams as
outputs first. And your
browser should support that.
(Not in all Encoder Versions
applicable)
