Blanco FI905X, Инструкция по эксплуатации

Страница: 34 / 43

34
3 KEYS - ELECTRONIC PROGRAMMER
The first start up
The numbers and the A letter on the display are blinking when the oven is switched on for
the first time, or after a power cut: the appliance cannot be operated in this condition
.
To set the hour and/or to enable the appliance to operate press the M key for at least 2
seconds
: the A letter turns off and the numbers now are steady on the display.
The dot (3) starts blinking : press the - or + key to set the hour .
The hour is accepted by the programmer just a few seconds after having released the key.
N.B. the appliance can be correctly used for cooking only when you will see on the display
the symbol (2).
The symbols on the display:
1 A * Automatic programme is working .
(* in some models there is the writinq 'Auto' instead of A).
2 The appliance i s ready for manual use (not automatic).
3 •
When blinking, the programmer is in setting hour mode .
4 Timer set .
5 - Decreasing numbers when setting the timer.
Also for choosing your desired sound level ( 3 levels available) .
6 M "Mode" key to access the programming options of the programme .
7 +
Increasing numbers when setting the timer.
Timer
The purpose of the timer is a sound signal, which can be set for a max time of 23h59min .
once elapsed the set time, th e (4) symbol turns off and a sound signal is heard ; this sound
set off automatically in 7min, or you can stop it by pressing any key of the programmer . To
set the timer press the M key for 2 seconds, or to see the (4) symbol blinking. Set the timer
by using the + or - keys. Release the + or - key when you have matched your des
i red tim e . In
a few seconds the current time appears on the disp l ay together with the (4) symbol . The
countdown s tarts i mmediately from now on.
Semi-automatic cooking
Cooking time : Once having selected a cooking function and set the desired temperature,
press the M key for a 2 seconds time to access the programming mode. The (4) symbo l
appears. Release and press again the M key. On the display, the A symbol starts blinking
and the " dur " writing appears on the display, then it changes to O' 00
. Set the cooking time
with the - or + keys. (max available time: 10h) . The selected time is automatically processed