Blanco FI905X, Инструкция по эксплуатации

Страница: 18 / 43

18
There are 5 cooking zone and there is a knob that applies and works each individual zone. These
knobs provide control of the ceramic hob's cooking zones. These knobs look similar to the above
image.
The zone it controls is shown above each knob. Turn the knob to the right to set the zone's operating
power; the settings range from a minimum of 1 to a maximum of 9. See above drawing.
The working power is shown by a display on the hob.
Heating accelerator - A
Each cooking zone is equipped with a heating accelerator.
This system allows the zone to be operated at peak power for a time proportional to the heating
power selected.
To start the heating accelerator, turn the knob to the left, select setting " A " and then release. The
letter " A " will appear on the display on the hob.
You now have 3 seconds to select the heating setting of your choice. Once a setting between 1 and 9
has been selected, "
A " and the chosen setting will flash in alternation on the display. '
While the heating accelerator is in operation, the heating level can be increased at any time. The "full
power" time will be modified accordingly. If the power is reduced by turning the knob anticlockwise,
option "
A " is automatically deactivated.
Power Function - P
The power function allows the user to operate each heating zone continuously at the maximum power
for a time of no more than 10 minutes. This function can be used, for example, to bring a large
amount of water to the boil in a hurry, or to turn up the heat under meat.
Turn the knob clockwise and set heating level 9, then use the knob to set the " P " position and release
it. " P " appears on the corresponding zone display.
After 10 minutes, the power is reduced automatically, the knob returns to the 9 setting and the "P"
disappears.
However, the power function can be turned off at any time by reducing the heating level. .
When the power function is selected for one heating zone (e.g. the left front zone), the power
absorbed by the second zone (Left rear zone) might be reduced to supply the maximum available
energy to the first zone.
Consequently, the power function takes priority over the heating accelerator.
If a pan is removed from the cooking zone while the power function is on, the function is switched off.