BLADEZ prisma Supra, Руководство пользователя

Страница: 24 / 30

ADDITIONAL MAINTENANCE INSTRUCTIONS
ADJUSTING THE BELT.
If your unit is not seated evenly on the four contact points, this may cause the belt
(38) to shift sideways. Rigorous quality control adjusts and checks the running
belt. However, due to weight differences and individual styles of running, the belt
may be prone to shift sideways. If the belt does shift to the left or right, stop the
machine.
BELT OFFSET TO THE RIGHT.
This procedure is very important. Follow these steps. In order to adjust the belt,
set the unit in motion at a speed of 2mi/h. If the belt has moved to the right, turn
screw (R) on the right-hand side of the machine a 1
⁄ 4 turn clockwise. Note the
position of the belt, if after one minute the belt is not completely centred then
repeat the operation. If you see that the belt has moved too far over to the left
then turn the right screw back slightly in an counterclockwise direction. As soon as
you have adjusted the belt you can begin exercising again.
BELT OFFSET TO THE LEFT.
In the event that the belt has moved to the left, turn screw (L) on the left-hand
side of the machine a 1
⁄ 4 turn clockwise. Note the position of the belt, if after one
minute the belt is not completely centred then repeat the operation. If you see that
the belt has moved too far over to the right then turn the left screw back slightly in
an counterclockwise direction
22
TREADMILL LUBRICATION.
Use the bottle of lubricant to lubricate the inside of the belt in order to keep your unit in top
condition
board is kept to a minimum and to ensure that friction between the belt and the
(Due to different running styles, always apply more lubrication to the area where you place
your feet during the exercise). It is advisable to lubricate the base of the belt between the
board and the belt as recommended on page 3.