BLADEZ prisma Supra, Руководство пользователя

Страница: 20 / 30

Treadmill Operations
ELEMENTS OF THE MONITOR
A: This display gives a simultaneous
readout of SPEED; INCL.; TIME; DIS.;
and CAL..
Matrix red dot window.
B: Incline function quick buttons (3-6-
9-12).
Speed function quick buttons (2-5-7-
10)
C: The electronic monitor has 29 push
buttons;INCLINE (
▲▼
); START;
PROGRAM; MODE; SPEED Km/h
(
▲▼
); STOP.Quick speed buttons;
Quick incline buttons; fan button;.12
quick program buttons.
E: Slot for safety key.
F: Safety key.
STARTING
Plug the unit into a wall socket with an
EARTH ground and set switch (L) to
position (1).
The safety key must be inserted into
its spot , otherwise the machine will
not operate. As soon as the safety key
is in place, the machine will beep,
indicating that the machine is READY
to be used.
CHANGING FROM
KILOMETERS TO MILES
This machine has the option to display
speed in km/h or mph. The factory
setting for the machine is mph.
To change from mph to km/h follow
these steps:
Unplug the machine from the mains
supply, remove the safety key. Plug
the machine back in and insert the
safety key into its slot.
Press and hold the INCLINE
▲
and
SPEED
▲
keys at the same time for 5
approximately seconds. The speed
display will show the number 1.0, the
said number corresponds to km/h per
hour.
OPERATING INSTRUCTIONS
MANUAL MODE
Pressing the START key, the machine
will start within 3 seconds, shown by a
countdown
3-2-1, at a speed of
0.6mph.
You can increase or decrease the
speed setting in MANUAL mode by
pressing
the SPEED
▼▲
keys,
between 0.6 – 11 mph, you can also
increase or decrease the speed
setting by pressing the quick access
keys, the said keys correspond to
values of 2
– 5 – 7 – 10 mph.
By pressing the inclination keys
INCLINE
▼▲
you can adjust the
elevation level, for values between 0-12.
There are also level function quick
access key, whose values correspond
to 3
– 6 – 9 – 12.
The machine will stop if you press the
STOP key or if you remove the
SAFETY KEY
18