manualshive.com logo in svg

Blade Fusion 480, Инструкция по эксплуатации

Поделиться
Скачать
Blade Fusion 480 Скачать руководство пользователя страница 10

EN

20mm

16mm

10

Prepare three cyclic servos as follows:

1.  Center the servos using either your receiver or a 

servo tester.

2.  Attach the servo arm in the position shown, 

perpendicular to the servo case, using the screw 
provided with the servo and medium thread-locking 
compound. 

3.  Attach the linkage ball to the outer servo arm 

location using an M2 nut.

4.  Attach the servos to the bearing blocks, in the 

positions shown using 3x10mm button head screws 
and medium thread-locking compound.

5.  Press the bottom end of the servo linkages on the 

servo arm linkage balls.

Prepare the tail servo as follows:

1.  Center the servo using either your receiver or a 

servo tester.

2.  Attach the servo arm in the position shown, 

perpendicular to the servo case, using the screw 
provided with the servo and medium thread-locking 
compound. 

3.  Attach the linkage ball to the middle servo arm 

location, using an M2 nut.

4.  Attach the tail servo mounts to the servo using 

M3x8mm button head screws and thread-locking 
compound. Do not fully tighten the servo mount 
screws.

5.  Attach the tail servo assembly to the inside of the 

right frame side as shown, using four 3x10mm 
screws, machined washers and medium thread-
locking compound.

6.  Fully tighten the servo mount screws.

Rotor head removed for clarity

Step F8

Step F9

Содержание Fusion 480



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды