manualshive.com logo in svg

BLADDERSCAN BVI 9400, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
BLADDERSCAN BVI 9400 Скачать руководство пользователя страница 59

51

Operations & Maintenance Manual: Using the Device

6.  To print via the onboard printer, press the 

Print

 button 

.

The label provides fields for patient ID, patient name, operator ID, and physician. This information must 
be written on the printout. 

Note: If the facility name, date, and time have not been set, those lines will be skipped on the printout.
Note: The BVI 9400 prints on thermal paper, which fades over time. For maximum storage life, Verathon

®

 

recommends you photocopy the printout. 

7.  If another exam on the patient is required, press the 

Home

 button 

 and repeat the procedures within 

this chapter. 

8.  Once you have completed the scan, wipe the ultrasound gel off of the patient and the probe.  

For complete cleaning instructions, see the 

Cleaning & Maintenance

 chapter on page 52.

PROCEdURE 4.  dELETE A SAVEd EXAM

Saved exams are indicated by orange folder icons along the left edge of the display. Complete this procedure 
if you would like to delete a saved exam.

1.  On the Home screen, press the 

Review

 button 

. The Review screen opens.

2.  Press the 

Down Arrow

 button 

 until the desired exam is selected, shown as an open blue folder icon.

3.  Press the 

Delete

 button 

. The exam is deleted.

Содержание BVI 9400





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды