BlackWing MK 2013, Руководство пользователя

Страница: 17 / 40

4.0 GETTING STARTED
R599823 - Blackwing Essential mk2013 User Manual 17
4.2 Connecting the Power Cord
• Before plugging in the Power Cord, ensure that all devices have been connected
to their respective inputs to this unit.
• Connect the power cord to the power input terminal of the projector.
4.3 Operating LEDs
C
AUTION AGAINST
F
IRE AND
E
LECTRIC
S
HOCK
Since the power consumption of this unit is high, insert the power plug directly into a wall outlet.
Do not use a power voltage different from that which is indicated. Do not cut, tear or modify the power cords. Also,
do not place a heavy object on, heat or stretch the power cords as this may cause damage to the cords.
ID
Operating LED
Description
STANDBY/ON
(green or red)
LAMP
(orange)
WARNING
(orange/red)
Blinking
1 red - - - Unit is in standby mode
2 green - - - Unit is in operate mode (during projection)
3 blinking green - - Yes
Unit is in operate mode, but HIDE is ON.
Press again the HIDE button to obtain a
picture.
4 blinking red - - Yes Unit is in cooldown mode. (switching off)
5/6 - orange - -
Lamp time has reached 2900 hours,
prepare to replace the lamp soon. If used
in low power mode, replace the lamp
before 4000 hours.
C
AUTION
:
When in Cool Down mode, do not pull out the plug from the outlet. Also, do not block the air inlets/exhaust
vents by standing the projector on its end or laying it on its side.
NB:
When the projector is running for more than 1 minute, the Standby/ON LED will automatically switch OFF.
STANDBY/ON
(green/red LED)
LAMP (orange LED)
WARNING
(orange/red LED)