BlackWing MK 2013, Руководство пользователя

Страница: 24 / 40

7.0 PICTURE ADJUST SETTINGS
24 R599823 - Blackwing Essential mk2013 User Manual
7.2 Contrast
The contrast function is used to adjust the contrast between the light and dark areas of the displayed image. A
correct contrast setting is important for good image reproduction. Adjust the Contrast value between -50 and 50.
7.3 Brightness
The brightness function is used to adjust the overall light output. Adjust the Brightness value between -50 and 50.
7.4 Color
The Color function (or Saturation) is used to adjust the saturation levels. Adjust the Color value between -50 and 50.
7.5 Tint
The tint function is used to adjust the color hue to obtain true color reproduction. Adjust the Tint value between -50
(more red) and 50 (more green).
7.6 Color Temperature
Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer
ambiance (more yellow/red) while high color temperature implies a colder light (more blue). Depending on the
Picture Profile selected, this setting can be set to:
• Preset: from 5500K / warm colors, up to 9500K / cold colors in steps of 500K.
• High Brightness used for maximum brightness output available.
• Custom1, Custom2 and Custom3 can be used to adjust color temperature to specific environment.
A Custom setting allows a fine adjustment of a Color Temperature by selecting it in the Correction Value menu.
Adjust the Gain values (bright part) and Offset values (dark part) for each color Red, Green and Blue.
7.7 Gamma
Gamma is the relationship between the color values of the data and the color values displayed. The Gamma
coefficient makes it possible to adjust the brightness of the midtones only without affecting the very bright and very
dark areas. If gamma is set too high, middle tones appear too dark. If it's set too low, middle tones appear too light.
Depending on the current active Picture mode, the Gamma setting can be set to:
• Normal: Standard setting for 2D
• Gamma A: focus on tone
• Gamma B: for film and movie with a great sense of depth.
• Gamma C: global picture is more contrasted compared to B setting.
• Gamma D: global picture has brighter midtones than “Normal” setting.
• Custom1
• Custom2
• Custom3
With a 3D signal input, Gamma can be set to the different values below if the Picture Mode is set to “3D”:
• Gamma A (3D): Recommended setting for 3D movies.
• Gamma B (3D): Global picture will appear brighter than A (3D).
• Gamma C (3D): Global picture will appear to have a greater sense of depth than A (3D)
The Custom Gamma setting can be set only with 2D signal inputs:
• Correction Value: a unique value that will act as a gamma coefficient between 1.8 and 2.6.
• Gamma Adjustment: the gamma curve can be adjusted for each color Red, Green and Blue.
• Copy: copy the adjusted values to temporal memory.
• Paste: paste values stored in memory to current profile.
Accurate color temperature may require professional tools such as dedicated software and colormeter. Wait
at least 10 minutes after startup before modifying the picture settings.