BlackSys CH-200, Руководство пользователя

Страница: 10 / 44

10
CAMMSYS BLACKBOX
1-5 ADAS caution
1. Only usable with GPS installed.
2. To use the ADAS Auto-calibration function, please install the product in accordance with the product
installation guide.
(see P.17)
3. The system
(LDWS)
may not operate adequately according to the actual driving conditions, resulting in an accident.
- Driving on roads with tight curves.
- Driving under bad weather conditions (rain, fog, and snow).
4. If the dash cam position or angle adjustment are adjusted after completed Auto-calibration, ADAS may
malfunction.
5. After adjusting the dash cam position or angle adjustment in the ADAS operation, be sure to reboot after power
off and perform auto-calibration.
6. Auto calibration condition
- Dash cam power ON
- GPS Data Received
- Vehicle speed higher than 30 km/h and drive for more than 3 minutes
7. Press the Wifi button in the dash cam for more than 3 seconds to re-calibrate.
8. In a poor sensitivity GPS or shadow areas, the ADAS function may not work or malfunction.
9. The functions of the ADAS have limitations: Always stay on course using the steering wheel and drive with care.
The system is not designed to compensate for a driver’s lack of caution and if you rely too much on the ADAS it
could lead to an accident. The driver is responsible for assuring lane changes and other maneuvers. Always pay
attention to the direction in which the vehicle is traveling and the vehicle’s surroundings.