_________________________________________PLT40 / PLT55______________________________________
15
CONNECTING TO THE MAINS
WARNING
First check the following points before connecting the device to the mains:
-
The electrical system in the workplace must have the protective and safety devices required by the
applicable standards.
-
The power cables must have the following dimensions: for 400V, the dimension must be at least 1,5 mm².
In the case of 230V, 3-phase power supply, there must be at least 2.5 mm².
-
The supply cable must have an earth wire and must be able to be connected to a fixed plug.
Connect the power supply line to the control cabinet. Put the main switch in the «ON». Check the direction of
rotation of the motor by pressing the lifting-motion switch.
AIRING THE SYSTEM
Air the system by lifting and lowering the lift several times.
POSITIONING THE LIFT
(See pages 11 and 12)
The lift must rest evenly on the floor.
DANGER
It is strictly forbidden to use the lift before it is fixed to the ground
.
(Risk of tipping over)
THE FOLLOWING ACTIONS SHOULD BE CARRIED OUT BY AUTHORISED PEOPLE ONLY.
