_________________________________________PLT40 / PLT55______________________________________
17
CLAMPS SET UP
-
Set up the 4 arms.
-
Set up the 4 clamp supports.
-
Tighten the bolts of the clamps’ jaws.
-
Lock the clamp supports by the means of the wedges.
-
Lock into place the 4 arms with the plates and the wedges.
-
Lift the whole system and remove the wheel stands.
Figure 20
SET UP OF THE FRAME STRAIGHTENER
-
Lower the lift until it stops automatically, at about 450 mm from the floor.
-
Position and fix the frame straightener where needed to perform the straightening.
Figure 21
