_________________________________________PLT40 / PLT55______________________________________
18
SET UP OF THE MEASURING SYSTEM:
Look at the operating manual supplied with your measuring system.
PULLS
-
Set up the clamps or the pulling accessories.
-
Set up the safety cable.
-
Place the arms of the Dozer in order to obtain the pulling angle required. Lock them into place by the
means of the pin.
Figure 22
DOWNWARD PULLS
EXTENSION
Use the vertical extension
PLT480
to perform high pulls.
Figure 23
WARNING
Remove the vertical extension as soon as you have finished the high pull.
REMINDER: Do not carry out any pull without having first correctly installed a safety cable.
