background image

6

Entering Programming

To enter System Programming:

1. Turn ignition On, Off, On, Off, and leave

ignition On.

2. Press the valet switch once.

• The siren will chirp once to indicate

entering program mode.

3. Press the valet switch the number times

equal to the desired feature.
• The LED will blink the number times

equal to the feature number.

4. Press and hold the valet switch for 2

seconds to change the operating mode

for that feature.
• The siren will chirp 1, 2, or 3 times to

indicate the new setting.

5. Turn off ignition to save changes.

Complete Default Reset

This procedure will set all Programmable

Features to factory default settings.

1. Enter System Programming.
2. Press and hold valet witch for 2 seconds.

• The siren will chirp 3 times.

• The parking lights will flash 3 times.
• All Programming options are now set

to factory default settings.

2. Turn off ignition.

Programmable Features

1. Valet Mode. Determines the length of

time the Valet switch must be held while the

ignition is on to override the alarm and put

the system into valet mode.
2. Auto Rearm. Automatically rearms the

system in case of accidental disarming. The

hood/trunk must not be opened or auto

rearm is bypassed.
3. Parking Light Operation. Selects whether

the parking lights flash twice or remain on

for 25 seconds after disarming the system.
4. Anti-Carjack Mode. Enables Anti-

Carjacking operation. The Anti-Carjacking

feature will automatically activate whenever

a door is opened while the ignition is on.
5. Shock Sensor. Disables the system’s

shock sensor if only door and hood/trunk

protection is desired.

Programmable Features
Step

Function

1 Chirp 

2 Chirps 

3 Chirps

1. Valet Mode

15 seconds 

5 seconds*

2. Auto Rearm

On

Off*

3. Parking Light Output

25 seconds 

Flash 2x*

4. Anti-Carjack Mode

Enabled

Off*

5. Shock Sensor 

Disabled

Normal*

6. Dome Light Output

Passive lock output

Passive & Ignition lock Dome light*

DIP Switch Features
Step

Function

On 

Off 

1. Arming Mode

Passive

Active*

2. Arming Chirps

Silent

Normal*

3. Horn Mode

Horn 

Siren*

4. Disarm Validation Wire

Off

On*

* default setting

Содержание OEM UPGRADE













Отзывы: