Black Widow Security OEM UPGRADE, Руководство пользователя

Страница: 2 / 12

2
DISARMING OPERATION
To disarm the system press the Unlock
button on the factory transmitter:
• The siren will chirp twice.
• The parking lights will flash twice.
• The doors will unlock.
• The dome light will turn on for 30
seconds (optional).
TAMPER ALERT
If the alarm was triggered while away, the
siren will chirp and the parking lights will
flash 3 times on disarming for tamper alert.
The LED will flash to indicate the zone:
• 2 Flashes = Shock Sensor
• 3 Flashes = Hood/Trunk
• 4 Flashes = Door Input
AUTO REARM
The Auto Rearm feature automatically re-
arms and locks the doors (requires
installation) in the event the system is
disarmed. Opening the hood, trunk, door, or
turning on the iginition cancels Auto Rearm. If
the optional dome light feature is installed, a
relay must be used to keep the Auto Rearm
feature from being cancelled when the dome
light turns on after disarming. This feature may
be enabled during installation.
IGNITION LOCK
The optional ignition locking feature
automatically locks the doors after the
ignition key is turned on. To avoid locking
keys in the vehicle, the ignition locking
feature will be cancelled if a door is open
when the ignition is turned on. This feature
requires additional installation.
REMOTE PANIC
In the event of an emergency, the system’s
siren can be triggered to attract attention.To
activate the Panic feature, press the Lock
button 4 times within 5 seconds:
• The siren will sound.
• The parking lights will flash.
Press the Unlock button to exit panic mode.
EMERGENCY OVERRIDE
If the transmitter becomes lost or fails to
operate, the system can be disarmed by
using the emergency override feature.
To override the system:
1. Enter the vehicle.
• The alarm will trigger.
2. Turn on the ignition key.
3. Press the Valet switch for 5 seconds (or
15 seconds if programmed).
• The siren will chirp 5 times and
enter valet mode.
• The starter defeat will be bypassed.
VALET MODE
When the system is placed into the Valet
Mode the security system will be disabled.
To enter or exit valet mode:
1. Be sure the system is disarmed.
2. Turn the ignition key on.
3. Press and hold the valet switch for
5seconds.
• The siren will chirp 5 times to enter
valet or 2 times to exit.
• The LED will turn on solid indicating
the system is in valet mode, or turn
off indicating valet mode exit.
NOTE: the LED remains off while the
ignition is on.
OPTIONAL AUXILIARY FUNCTION
To activate the auxiliary function press the
Lock button 2 times within 3 seconds. This
feature can be used to activate an optional
trunk release or remote start module.