Black Tools GTE-2000, Инструкция по эксплуатации

Страница: 22 / 32

x
Part II: Setting Up The Log Splitter
21
During the filling process, please be careful not to
add too much or too little engine oil, to avoid
damage. Use the right type of oil (e.g. multi-grade
oil 10W40) as described in the engine manual.
Make sure the wood chipper is correctly aligned
horizontally before filling it with oil.
The engine has 2 filler necks. You can see the rear
filler neck in Figure 59.
Pour in oil until it becomes visible in the upper
section of the filler neck (i.e. just below overflow
point).
After filling, close the filler neck by turning the cap.
Then, fill normal petrol into the tank.
Fig. 59 Filler neck
Fig. 60 Fuel tank