Trimming Length Settings
The Groomer has 2 Acu•Control comb
attachments with 5 settings each providing
remaining hair lengths from
1
⁄
16
inch up to
11
⁄
16
inch
(1.5 mm to 17 mm).
◗
Short comb (settings 1-5): for remaining hair
lengths of
1
⁄
16
in./1.5mm to
3
⁄
8
in./9mm
Setting Lengths
#1 Stubble (
1
⁄
16
in./1.5mm)
#2 Closely cropped
#3 Short
#4 Medium Short
#5 Medium
◗
Long comb (settings 1-5): for remaining hair
lengths of
7
⁄
16
inch/10mm to
11
⁄
16
inch/17mm
Setting Lengths
#1 Medium
#2 Medium Long
#3 Long
#4 Extra Long
#5 Longest (
11
⁄
16
in./17mm)
The remaining hair length corresponds with the
smallest distance between the cutting blade and
the spot where the comb is in contact with the skin.
◗
Cutting without comb attachment or setting
Acu•Control comb to #0 position will result in
a stubble beard look.
Trimming Without Guide Comb
Remove Acu•Control comb if you are:
◗
Defining hair lines
◗
Trimming nape of neck
◗
Removing single, unwanted hairs
Be certain Personal Groomer is in the OFF
position.
Slide the Acu•Control comb adjustment back
to correspond with length setting #0 or
remove the comb by pulling it off the
Groomer so that you cut using the blade only.
Never pull off the Guide
Comb Attachment by
grasping the flexible top
portion.Always pull off by the
bottom part of attachment.
Switch the Personal
Groomer on.
Make well-controlled
movements.Touch the
hair/skin lightly with the
Personal Groomer.
Using Nose, Ear &
Eyebrow Attachment
To attach or remove nose,
ear, eyebrow attachment
(change of attachments):
◗
Slide in the Acu•Control comb
to position “0” or remove it.
◗
Remove the main cutting unit.
Attach the nose, ear, eyebrow
attachment by inserting its hook
into the housing and push it back
until you hear a click.
To reattach the main cutting
unit repeat the above
mentioned procedure
attaching the main cutting
attachment instead.
Caution: Do not insert the tip more than
3
⁄
16
in./5mm into your nostril or ear
Trimming Nose Hair
Place nose, ear and eyebrow attachment on
Groomer. Make sure nasal passages
are clean.
Switch the Personal Groomer on.
Insert the Personal Groomer
into one nostril and slowly
move it in and out while
turning it around at the same
time in order to remove
unwanted hair. For best
results, make sure the side of the tip is firm
against skin.This will reduce the tickling
effect that can occur during trimming of
nose hair.
Wipe attachment clean after each use.
CAUTION: Do Not insert the tip more
than
3
⁄
16
in./5mm into your nostril.
4
3
2
1
2
1
4
3
2
1
1
2
1
2
Storage
◗
Store the Groomer and
attachments in the storage stand
to prevent damage.
Replacing The Cutting Unit
If your cutters become damaged or worn, do not
continue using the Groomer. Replace cutters
immediately.
Open the cutting unit.
Remove the old cutting unit
by pulling it upwards.
Insert the hook into the
housing and push the cutting
unit back onto the Groomer
until you hear a click.
Assistance
For assistance or the Authorized Norelco Service
Location nearest you, call toll free:
1-800-243-3050
or for live help online visit our website:
www.norelco.com
Authorized Norelco Service Location information
is available 24 hours a day, 7 days a week.
Battery Removal
◗
This Norelco Groomer contains a rechargeable
Nickel-Cadmium battery, which must be
disposed of properly.
◗
Battery should only be removed when
Groomer is to be discarded.
◗
Refer to Battery Removal instruction sheet for
directions on removing the rechargeable battery.
3
2
1
4203 000 51501
ENGLISH
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic safety
precautions should always be followed, including
the following:
Read all instructions before using this
appliance.
DANGER
To reduce the risk of electric shock:
1. Do not reach for a Personal Groomer that
has fallen into water. Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store Personal Groomer
where it can fall or be pulled into a tub or
sink. Do not place in or drop into water or
other liquid.
4. Always unplug this Personal Groomer
from the electrical outlet immediately
after using, except when Personal Groomer
is (re)charging.
5. Unplug Personal Groomer before cleaning.
6. When discarding Personal Groomer,
unplug Personal Groomer to remove
rechargeable battery. See Battery Removal
instruction sheet.
WARNING
To reduce the risk of burns, fire, electric
shock or injury to persons:
1. Close supervision is necessary when
this appliance is used by, on, or near children
or invalids.
2. Use this Personal Groomer for its intended
household use as described in this manual.
Do not use attachments not recommended
by Philips Electronics North America
Corporation.
3. Never operate this Personal Groomer if it
has a damaged cord or plug, if it is not
working properly, if it has been dropped,
damaged, or dropped into water. Return the
Personal Groomer to an Authorized
Norelco Service Location for examination
and repair.
4. Keep the Personal Groomer, cord and any
attachments away from heated surfaces.
5. Never drop or insert any object into any
opening.
6. Do not operate, charge or plug in Personal
Groomer outdoors or where aerosol
(spray) products are being used or where
oxygen is being administered.
7. Do not use this Personal Groomer with a
damaged or broken cutter, or cutting unit as
injury may occur.
8. Always attach plug to Personal Groomer
first, then to outlet.To disconnect, turn
ON/OFF switch to “OFF” position (switch is
down), then remove plug from outlet.
9. To prevent possible damage to the cord, do
not wrap cord around the Personal
Groomer.
10. Never put Personal Groomer in direct sun-
light or store at a temperature above 140°F.
11. This Personal Groomer is for use on human
facial hair only. Do not use this trimmer for
any other purpose.
12. Always store your Personal Groomer,
attachments and adaptor in a moisture-free
area. Make sure the cord is disconnected
from the Personal Groomer.
SAVE THESE
INSTRUCTIONS
IMPORTANT: YOUR PERSONAL
GROOMER CONTAINS A NICKEL-
CADMIUM RECHARGEABLE BATTERY.
See Battery Removal instruction sheet.
Cordless Trimming
Charge according to directions. Unplug
Personal Groomer from outlet.
Slide ON/OFF switch ON to begin
trimming.
If the battery is empty and you want to trim
your beard, charge Personal Groomer for
at least 1.5 hours and you will have enough
power for one use.
Put It To The Test
Like many new products, your Norelco
Acu•Control Personal Groomer may take a little
getting used to. If you are using an electric Personal
Groomer for the first time, or if you’ve been using
a different brand, take the time to acquaint
yourself with your new Personal Groomer.
Your Personal Groomer features the unique
Acu•Control System combined with adjustable
Length Settings to make trimming facial hairs
goof proof.
Throw your scissors away and put your new
Personal Groomer to the test. We guarantee
precise, professional results or Norelco will refund
you the full purchase price, guaranteed.
Acu•Control System
The unique Norelco ACU•CONTROL SYSTEM
puts you in complete control while trimming your
facial hairs with no prior experience needed.The
flexing Guide Comb adjusts automatically to hug
the contours of your face for a trim that is both
even and accurate. And, it’s easy to maneuver over
those hard-to-reach areas such as the throat and
chin.The Hair Length Selector allows you to
choose among 5 short and 5 long preset hair
lengths and clicks into position so you can control
the exact hair length you desire or vary the length
of your facial hair.The Norelco Acu•Control
System with Hair Length Selector for professional,
goof-proof results every time or your money back.
Trimming
◗
Always comb the beard and/or moustache with
the styling comb before you start trimming.
If you are trimming for the first time, be careful.
Do not move the Personal Groomer too fast.
Make smooth and gentle movements.
Trimming with Acu•Control
Guide Comb Attachment
Put on one of the Acu•Control
combs according to the desired
trimming length, short comb =
short hair, long comb = long hair.
To assemble the Acu•Control
combs, insert the hook of the
comb into the Personal Groomer and push it
down until you hear a click.
Slide the Hair Length
Selector to the desired
trimming length setting.The
numbers are located on the
left side of the comb
adjustment grip area.The
chosen setting is indicated by the arrow.
◗
If you are trimming for the first
time, start by using the
Acu•Control long comb and the
maximum trimming length setting
#5 to prevent accidentally
trimming hairs too short. As you
become familiar with the settings, adjust Hair
Length Selector to desired trimming length.
Selector will “click” into position at each setting.
Switch the Trimmer ON.
To trim in the most effective
way, move the Trimmer
against the direction of hair
growth. Make sure the
surface of the Guide Comb
always stays in contact with
the skin.
NOTE: Since all hairs do not grow in the same
direction, you may want to try different trimming
directions (i.e., upwards, downwards, or across).
Practice is best for optimum results.
If a lot of hair has
accumulated in the Guide
Comb, remove the Comb and
blow and/or shake the hair
out of the comb.You can also
use the cleaning brush
provided to remove hair from the comb area.
4
3
2
1
3
2
1
Trimming Ear Hair
Nose, ear and eyebrow
attachment should be on
Groomer. Clean outer area
of ear and make sure it is
free of wax.
Switch the Personal Groomer on and move
the tip softly around the edge of ear to
remove hairs extending beyond the outer ear.
Then, carefully insert the tip into outer ear.
CAUTION: Do not insert the tip further
than
3
⁄
16
in./5mm into the ear as this could
do damage to the eardrum.
Trimming Eyebrows
Nose, ear and eyebrow
attachment should be on
Groomer.
Switch the Personal
Groomer on and use the tip
to cut individual eyebrow hairs.
Note:The Groomer can be used for clipping
single long hairs.
Put the Groomer at the root
of the hair and move it along
the eyebrow in the direction
of hair growth.
IMPORTANT: It is not
recommended that you use the Groomer to
define or trim the entire eyebrow. Do not trim
your eyelash, be careful not to get too close to
your eyelashes and eyes!
Cleaning
◗
Always switch Groomer OFF before cleaning.
◗
Do not use abrasive, scourers or liquids such as
alcohol, benzene, bleach or acetone to clean the
Groomer.
◗
Never clean, replace or remove Groomer
attachments with motor ON.
◗
Do not apply pressure to cutters.
◗
Do not touch cutters with hard objects as this
may damage them.
◗
Do not use while bathing, showering or
immerse the Groomer in water or other liquids
as damage to Groomer may occur.
During Use:
◗
If cut hairs have accumulated in the Guide
Comb area, remove hairs by shaking, blowing or
using cleaning brush provided.
Once a Week:
Make sure the Groomer is switched OFF
and disconnected from the electrical outlet.
Slide back or remove the
Guide Comb Attachment.
Open the cutting unit by
pushing it backwards (1). Be
careful that the cutting
element does not drop
down.
Clean the cutting unit and
the inside of the appliance
with the brush supplied (2).
Close the cutting unit by
inserting the hook into the
housing and pushing it back
into place on the Groomer
until you hear a click.
Cleaning Nose Hair Trimmer
Attachment
Always switch off the
Personal Groomer before
cleaning. Do not clean the
Groomer under water or
other liquids!
Remove the grooming
attachment by pushing it
backwards. Blow and/or
shake the hair out of the
nose hair trimmer.
Reassemble one of the two
cutting attachments on the
appliance.
2
1
5
4
3
2
1
3
2
1
2
1
A. Neckline & Sideburn Trimmer
B. Lifetime Self-Sharpening 3-Dimensional
Rounded Chromium Steel Cutter Blades
Beard & Moustache Trimmer Attachments:
C.
Short Acu•Control Comb: 5-Short
Adjustable Settings
D.
Long Acu•Control Comb: 5-Long
Adjustable Settings
E. Hair Length Selector
F. ON/OFF Switch
G. Cleaning Brush
H. Styling Comb
I. LED Charge Indicator Light
J. Adaptor Plug
K. Nose, Ear & Eyebrow Attachment
L. Storage Stand
To Charge/Recharge
◗
Fully charge Groomer before using for the first
time.
◗
Battery performance is best if you recharge only
when the battery is (almost) completely empty.
◗
Charging or recharging at temperatures below
40˚F or higher than 95˚F adversely affects
lifetime of battery.
◗
Continuously recharging Personal Groomer will
reduce life of battery.
Be certain Personal
Groomer is OFF.
Connect cord to Personal
Groomer. Plug into any 120V
AC outlet. Use only cord
provided.
After a few moments, green
Charging Indicator Light on
the adaptor will go on to
indicate Personal Groomer
is charging.
◗
It will take approximately 10 hours to fully
charge Personal Groomer for a cordless
trimming time of up to 40 minutes.
Disconnect the cord and unplug from
electrical outlet.
Optimize the working life
of the battery
◗
After Personal Groomer has been charged for
the first time, do not recharge Personal
Groomer between trimming sessions. Continue
using it until the battery is completely empty.
◗
Discharge the battery completely twice a year
by letting the motor run until it stops.
◗
Do not charge for more than 24 hours.
◗
Do not keep cord permanently plugged in.
◗
If Personal Groomer hasn’t been used for a long
period of time, Personal Groomer must be
recharged for a full 10 hours.
4
3
2
1
1
2
C
H
E
F
G
A
B
I
D
K
L
J
MAX 3⁄16 in./5mm
MAX 3⁄16 in./5mm
Features
Name
Address
City
State Zip
Telephone No. ( )
REASON FOR RETURNING:
60-DAY MONEY-
BACK GUARANTEE
If you are not fully satisfied with your Norelco Personal
Groomer, send the product back and we’ll refund you the
full purchase price.
The Groomer must be shipped prepaid by insured
mail, insurance prepaid, and have the sales receipt,
indicating purchase price and the date of purchase,
enclosed.The Trimmer must be postmarked no later
than 60 days after the date of purchase. Norelco
reserves the right to verify the purchase price of the
Groomer and limit refunds not to exceed suggested
retail price.
Send dated sales receipt, your complete name and
address as indicated below, and the Trimmer, prepaid to:
Norelco Consumer Products Company
A Division of Philips Electronics
North America Corporation
450 North Medinah Road, Dock 16
Roselle, IL 60172-2329
Please allow 4-6 weeks for delivery of check.
(Please Print)
AREA CODE
