Part
II:
Setting Up
The
Log
Splitter
10
Fig. 7 Scope of delivery engine and feed hopper
3.
Mount the front stand
Jack up the engine block with the drum housing in a manner,
which allows screwing on the stand and the wheels. At the
same time, adhere to normal safety precautions. Adjust the
stand so that it is in the position shown in Figure 9 and secure
the stand again using the split pin. Then, loosen the four
bolts, attach the stand and screw it back on tightly.
pin
Fig. 11 Removed bolts (arrangement)
Fig. 10 Loosening bolts, attachment to housing
Fig. 5a Feather key as a spare part
Fig. 8 Scope of delivery discharge chute
Fig. 9 Adjusting and securing using the split
Fig. 13 Attachment to housing using bolts
Содержание GTE-2000
Страница 1: ...GTE 2000 WOOD CHIPPER Instruction Manual Table of Contents ...
Страница 3: ...Part I GeneralSafety Rules 2 Safety Labels Found on Your Unit ...
Страница 16: ...Part II Setting Up The Log Splitter 15 tighten the plate again using the four bolts ...
Страница 24: ...x Part II Setting Up The Log Splitter 23 Fig 63 Open choke and fuel shut off Choke Fuel tap ...
