Black Horse bravo 3d, Инструкция по эксплуатации

Страница: 9 / 27

9
BRAVO. Instruction Manual
Locate the long piece of wire used for the
throttle pushrod. One end of the wire has been
pre-bend in to a “Z” bend at the factory. This
“Z” bend should be inserted into the throttle
arm of the engine when the engine is fitted onto
the engine mount. Fit the engine to the engine
mount using the screws provided.
INSTALLING THE ENGINE.
C/A glue.
Fuel tank.
135 mm.
Do not secure the tank into place perma-
nently until after balancing the airplane.
You may need to remove the tank to mount
the battery in the fuel tank compartment.
Drill a hole
3mm diameter
Mark point.
Mark point.