24
BRAVO.
INSTRUCTION MANUAL
Wing bolt.
3.
Test fit the dihedral brace into fuse-
lage.
2. Using a pen, mark the locations of the
two mounting screws. Remove the tail wheel
bracket and drill 1mm pilot holes at the loca-
tions marked.
3. Secure the tail wheel bracket in place
using three 3mm x 12mm wood screws. Be
careful not to overtighten the screws.
Rudder pushdrod.
2.
Locate the aluminium wing dihedral
brace.
1. Using a modeling knife, remove the cov-
ering fuselage.
WING ATTACHMENT.
Mark point.
Secure.
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket should
be centered on the plywood plate.
Содержание bravo 3d
Страница 27: ...27 BRAVO Instruction Manual...
