20
BRAVO.
INSTRUCTION MANUAL
Throttle servo.
Throttle pushrod.
Rudder cable.
Elevator pushrod.
Rudder push-pull
cable.
Cut.
INSTALLING THE THROTTLE PUSHROD.
Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal connec-
tor apply a small drop of thin C/A to the bot-
tom nut. This will prevent the connector from
loosening during flight.
Servo arm.
Conector.
Содержание bravo 3d
Страница 27: ...27 BRAVO Instruction Manual...
