Black Horse bravo 3d, Инструкция по эксплуатации

Страница: 22 / 27

22
BRAVO.
INSTRUCTION MANUAL
PARTS REQUIRED

1) Assemble and mounting the wheel pants
as shown in the following pictures.

   3. Position the battery pack and receiver
behind the fuel tank. Use two tie wraps to hold
the battery and receiver securely in place. As
pictures below.
Do not permanently secure the receiver and
battery until after balancing the model.

   4. Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
Tie wrap.
Battery.
Tie wrap.
Receiver.
MAIN GEAR INSTALATION.
5 x 40mm.