TONADO- Item code: BH17.
Instruction Manual
14
4. Remove the stabilizer. Using the lines
you just drew as a guide, carefully remove the
covering from between them using a modeling
knife.
When cutting through the covering to
remove it, cut with only enough pressure
to only cut through the covering it’s self.
Cutting into the balsa structure may
weaken it. This could lead to possible
failure during flight
Bottom side
Remove
covering.
C/A glue.
3. Mark the shape of the vertical on the left
and right sides onto the horizontal stabilizer
using a felt-tip pen
2. Draw a center line onto the horizontal
stabilizer. Then slide the horizontal into the
fuselage.
Center line.
Pen.
Top side.
Bottom side.
