SPEED AIR-40.
Instruction Manual.
4
Thread.
Electric wire.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
2 x 10 mm.
Secure.
Remove covering.
Servo mount.
Servo tray
R e m o v e
covering.
3. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.
4. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
