SPEED AIR-40.
Instruction Manual.
19
Nose gear pushrod.
Rudder servo.
Elevator servo.
1) Plug the servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch.
q
2) Wrap the receiver and battery pack in
the protective foam to protect them from
vibration.
INSTALLING THE RECEIVER AND BATTERY.
Battery.
3) Do not permanently secure the receiver
and battery until after balancing the model.
4) Using a 2mm drill bit, drill a hole through
the side of the fuselage, near the receiver, for
the antenna to exit.
1) Install the throttle servo and the swich
in the servo tray.
See pictures below.
Servo tray.
SWITCH-THROTTLE SERVO
INSTALLATION.
Receiver.
