SPEED AIR-40.
Instruction Manual.
22
1) We highly recommend setting up a plane
using the control throws listed.
2) The control throws should be measured
at the widest point of each control surface.
3) Check to be sure the control surfaces
move in the correct directions.
CONTROL THROWS.
Ailerons : 15mm up 15mm down.
Elevator : 10mm up 10mm down.
Rudder : 15mm right 15mm left.
1) Completely charge your transmitter and
receiver batteries before your first day of flying.
2) Check every bolt and every glue joint in
your plane to ensure that everything is tight
and well bonded.
3) Double check the balance of the airplane.
4) Check the control surface.
5) Check the receiver antenna . It should
be fully extended and not coiled up inside the
fuselage.
6) Properly balance the propeller.
We wish you many safe and enjoyable
flights with your SPEED AIR - 40.
Aileron Control
10
10
PRE-FLIGHT CHECK.