SUKHOI 31.
INSTRUCTION MANUAL
13
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
See pictures below:
1. Using a modeling knife, cut away the
covering from the fuselage for the stabilizer
and remove it.
HORIZONTAL STABILIZER.
ELEVATOR INSTALLATION.
Elevator servo.
Remove covering.
2. Draw a center line onto the horizontal
stabilizer. Then slide the horizontal into the
fuselage.
Bottom side.
Temporary pin to
keep hinge centered.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Cut the covering
away from the slot.
2. Draw a center line onto the horizontal
stabilizer. Then slide the horizontal into the
fuselage.
Center line.
Содержание SUKHOI 31 BH11
Страница 27: ...SUKHOI 31 INSTRUCTION MANUAL 27...
