Black Horce Model SUKHOI 31 BH11, Инструкция по эксплуатации

Страница: 4 / 27

SUKHOI 31. Instruction Manual
4
 3. Drill 1,5mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo. Install servo into ai-
leron servo tray as same as picture below.

4. Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
Electric wire.
2 x 10 mm.
 5. Instal servo tray with aileron servo into
the wing as same as picture below.
Servo tray.
Wing.
Repeat the procedure for the other wing
half
.
3x40mm.
Nilon control clasp.
M3 lock nut.
INSTALLING THE AILERON CONTROL HORN.
Control horn of Aileron