EDGE 540-V3 30cc Item code: BH94
.
Instruction Manual
16
Locate the aluminium wing dihedral brace.
XIV. WING ATTACHMENT
*** Test fit the aluminium tube dihedral brace into
each wing haft. The brace should slide in easily. If
not, use 220 grit sand around the edges and ends
of the brace until it fits properly.
851mm
Aluminium tube.
25mm.
Attach the aluminium tube into the fuselage.
Insert two wing panels as pictures below.
Secure
Secure
4x12mm
Push in
1. Push in
2. Push in
XV. INSTALLING COCKPIT
FUSELAGE
See picture below:
C/A Epoxy glue.
Pillot
Push in
Position the canopy so the rear frame on the
canopy is aligned with the rear edge of the cockpit
opening. Use canopy glue to secure the canopy
to the canopy hatch. Use low-tack tape to hold the
canopy in position until the glue fully cures. Wrap
the tape completely around the canopy hatch, as
the tape does not stick well to the covering. We
used balsa sticks to hold the lower edges of the
canopy tightly against the canopy hatch.
