Black+Decker TS2090, Оригинальное руководство пользователя

Страница: 5 / 32

5
ENGLISH
(Original instructions)
• To avoid the risk of electric shock, do not
immerse the cord, plug or appliance in
water or other liquid.
Extension cables
• Up to 30m (100 ft) can be used without
loss of power.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Symbols on appliance
The following symbols may be shown on the
tool along with the date code:
Warning! Hot surface.
Features
1. Clamp
2. Release button
3. Power indicator
4. Temperature Indicator
5. Lid
6. Heating element
7. Heat insulated handle
8. Waffle plates
9. Grill plates
10. Sandwich plates
Use
• Please remove any packaging that is still
present. Unwind the mains lead
completely.
• Clean the housing and the baking
surfaces with a damp cloth.
Warning! In order to remove the protective
coating on the heating coil you should
operate the device approximately three
times without any food inside.
Note:
Any smoke or smells produced during
this procedure are normal. Please ensure
sufficient ventilation.
• Lightly grease the baking surfaces before
the unit is used for the first time.
• Use the appliance for about 10 minutes
with the toasting surfaces closed.
• After the device has cooled down, wipe
the baking surfaces off with a paper
towel.
Inserting/changing of the cooking
plates
Warning! Make sure that the plug is not
inserted when inserting or changing the
cooking plates.
• Release the clamp (1) and lift the lid (5)
upwards.
• If baking plates have already been
inserted into the device, press down the
release buttons (2) on the insides of the
handles (7) in order to release the baking
plates. Then remove the plates.
• Now insert the desired baking plates until
they lock in place. Please note the pins on
the edge of the baking plates. The device
is supplied with one set of baking plates
each for sandwiches (10), waffles (8) and
for grilling (9).
Toasting sandwiches
Note: Lightly spread the outside of the
bread (the side coming into contact with the
toasting surfaces) with butter or margarine.
That way your sandwich can be easily
removed afterwards from the sandwich
toaster.
• Connect the device to a correctly
installed socket with earthing contact.
Both control lamps will now light up.
Once the set temperature has been
reached the green temperature Indicator
(4) goes off. The red power indicator (3)
remains on to indicate that the device is
switched on.