English
8
• Release the hose connector
3
from the main body hose
port
6
as shown in Figure L.
Fig. Q
27
12
• Place the dust canister over a trash bin and press
the dust canister lid release button
27
to empty the
canister as shown in Figure Q.
• Push the compaction handle
22
down to empty the
contents of the dust canister
9
as shown in Figure R.
nOTE:
The dust compaction handle
22
can also be used to
compact the contents of the dust canister
9
, doubling the
capacity of the dust canister.
• Close the dust canister lid
12
, until it “clicks” firmly
into position.
Compacting the contents of the dust
canister (Fig. R)
With the dust canister lid
12
closed, push the compacting
handle
22
down to compact the contents of the dust
canister
9
thus increasing its capacity as shown in Figure R.
Fig. R
22
9
12
Releasing the dust canister (Fig. R–T)
nOTE:
The dust canister can be released either from the
unit while it is in chassis mode, as shown in Figure S, or
when being used in the lift away canister vac mode, as
shown in Figure T.
• Press the dust canister release lever
10
down to release
the dust bowl.
• Free the dust canister
9
from the lift away canister
vac
5
.
nOTE:
The catch
34
ensures that the unit will be unable to
start when the dust canister
9
is not connected to the lift
away canister vac
5
or when the compaction handle
22
is
in operation.
• Using the dust canister handle
35
and holding the
unit over a suitable waste receptacle, press the dust
canister release button
27
to release the dust canister
lid
12
and push the compacting handle
22
down to
empty the contents of the dust canister
9
as shown in
Figure R.
Fig. S
5
9
10
34
35
Fig. T
9
10
5
35
Cleaning the filters (Fig. S–X)
• Press the dust canister release lever
10
down to release
the dust canister as shown in Figure S.
• While holding the compaction handle
22
, lift the filter
assembly
28
from the dust canister
9
by rotating
counter-clockwise as shown in Figure U.
nOTE:
A scented disc will be provided in foil packaging. This
is to be opened and the disc is to be placed in the bottom
of the pre-filter allowing for a pleasing odor to be released
when the appliance is in use.
• The filter
29
can now be removed from the pre filter
30
as
shown in Figure V.
• The dust canister can be seperated into two parts,
9
and
40
, for a more thorough cleaning as shown in
Figure W.
• Shake or lightly brush any loose dust off filter.
