English
6
State of charge indicator
Allows you to monitor the level of power being used.
BATTERYSENSOR Indicator
The LED battery indicator displays the remaining charge and warns you
when the battery is low. The final LED will flash continuously when
there is only 1 minute of runtime remaining. All LEDs will flash when
the unit is discharged.
FILTERSENSOR
Smart sensor technology automatically detects (the symbol will light
red) when the filter becomes clogged and needs to be cleaned.
Fig. H
35
Adjustable suction force (Fig. I)
The appliance has an adjustable suction slider
37
. The
vacuum can be adjusted to operate at a lower suction level
to extend run time or higher suction level to pick up debris
that requires more power.
• To increase suction slide your finger on the adjustable
suction slider
37
to the right as shown in Figure I.
Corresponding LEDs on the min/max indicator will
display the selected suction force.
• To decrease suction slide your finger on the adjustable
suction slider
37
to the left.
Fig. I
37
Powered rotary brush and LED (Fig. J, Z)
• To engage the rotary brush
39
(Fig. Z) inside the floor
head
7
, depress the rotary brush ON/OFF button
38
as shown in Figure J. When the rotary brush is ON the
LED work light will illuminate to better see debris as
you vacuum.
• To disengage the rotary brush
39
, depress the rotary
brush ON/OFF button
38
a second time.
Fig. J
38
Removing and attaching the lift away
canister (Fig. K, L)
• To remove the lift away canister from the chassis,
press the lift away canister release button
41
to release
the lift away canister
5
from the chassis
23
hold the lift
away handle
36
and lift out the lift away canister
5
as
shown in Figure K.
• Release the hose connector
3
from the chassis hose
port
6
as shown in Figure L.
• To attach the lift away canister to the chassis
, hold
the main lift off handle
36
and place the lift away
canister
5
onto the chassis and slide downward so the
canister locks into position as shown in Figure K.
• Connect the hose connector
3
to the chassis hose
port
6
as shown in Figure L.
Fig. K
41
23
36
5
