background image

 

MULTIPORT ANALOG VOIP ROUTER

 

2

 

TRADEMARKS USED IN THIS MANUAL

 

All applied-for and registered trademarks are the property of their respective owners.

 

 

The VOE230 contains no user serviceable parts. The 
equipment shall be returned to Black Box for repairs, 
or repaired by qualified service personnel.

 

 

Mains Voltage: Do not open the case the power cord 
is attached. The external power adaptor shall be a 
listed limited power source that incorporates a dis-
connect device and shall be positioned within easy 
reach of the operator. The mains outlet shall be 
within 10 feet (3 meters) of the device, shall be eas-
ily accessible, and protected by a circuit breaker.

 

 

For AC powered units, ensure that the power cable 
used meets all applicable standards for the country 
in which it is to be installed, and that it is connected 
to a wall outlet which has earth ground.

 

 

Hazardous network voltages are present in WAN 
ports regardless of whether power to the VOE230 is 
ON or OFF. To avoid electric shock, use caution when 
near WAN ports. when detaching the cables, detach 
the end away from the VOE230 first.

 

 

Do not work on the system or connect or disconnect 

cables during periods of lightning activity.

 

In accordance with the requirements of council directive 2002/96/EC on Waste of 
Electrical and Electronic Equipment (WEEE), ensure that at end-of-life you separate 
this product from other waste and scrap and deliver to the WEEE collection system in 
your country for recycling.

WARNING

Содержание VOE231

















Отзывы: