MULTIPORT ANALOG VOIP ROUTER
9
5. Loading the configuration
Black Box provides a collection of configuration templates on the CD-ROM
shipped with your VOE230 device, one of which may be similar enough to your
application that you can use it to speed up configuring the VOE230. Simply
download the configuration note that matches your application to your PC. Adapt
the configuration as described in the configuration note to your network (remem-
ber to modify the IP address) and copy the modified configuration to a TFTP
server. The VOE230 can now load its configuration from this server.
Note
If your application is unique and not covered by any of Black Box’s con-
figuration templates, you can manually configure the VOE230 instead of
loading a configuration file template.
In this example we assume an TFTP server resides on the host with the IP address
10.10.1.11 and the configuration file named
VOE.cfg
resides in the root directory
of the TFTP server.
10.10.22.50(if-ip)[eth0]#
copy tftp://10.10.1.11/VOE.cfg star-
tup-config
Download...100%
10.10.22.50(if-ip)[eth0]#
After you reboot the VOE230 the new startup configuration will become active.
10.10.22.50(if-ip)[eth0]#
reload
Running configuration has been changed.
Do you want to copy the 'running-config' to the 'startup-con-
fig'?
Press 'yes' to store, 'no' to drop changes :
no
Press 'yes' to restart, 'no' to cancel :
yes
The system is going down
When you issue the reload command, the VOE230 will ask if you want to copy the
running configuration to the startup configuration. Since you just downloaded a con-
figuration file to the startup configuration you must answer this question with
NO
.
Otherwise, the downloaded configuration will be overwritten and lost!
IMPORTANT
