MULTIPORT ANALOG VOIP ROUTER
8
4. Access the Command Line Interface
1. In the Discovery Tool window, select the IP address of your VOE230.
2. Right-click the selected line, and select
Telnet
.
3. In the telnet window, enter the username
administrator
. At the password
prompt simply press the
enter
key. The VOE230 will respond by display-
ing its IP address as the command line prompt.
4. After you log in your VOE230 will be running in operator execution mode
(indicated by > character in the command line prompt). To enter configura-
tion mode, use the commands enable and configure.
10.10.22.50>
enable
10.10.22.50#
configure
10.10.22.50(cfg)#
You may now start to configure the VOE230 from scratch using the CLI com-
mands, but we recommend that you start your configuration from a template. See
section “Loading the configuration” on page 9 for further details.
