19
TX/CX 4000
Follow these steps to enter a host
download command.
1. Type the Command Pass-Thru
delimiter &% (or alternate CPT
start delimiter as described in
the table) in the document at
the point where the command
is to take effect.
2. Type an upper-case “Z.”
3. Type the command number for
the command to be used, as
shown in
Table 4-2
.
4. Type a comma.
5. Type the command. No spaces
are allowed. A space or invalid
character in a command causes
the TX/CX 4000 to ignore the
command and resume printing
from the point where the error
occurred.
For example, to change the
Twinax Address from the default
of 0 to 4, enter:
&%Z00,4
6. Multiple commands can be
chained together by using a slash
(/) or backslash (\) to separate
the commands (no spaces
allowed). For example, to set the
Output Printer (Command 60)
to HP LaserJet PCL-4 (Option
2), the Output Port (Command
66) to Parallel (Option 0), and
the Duplex Printing (Command
33) option to long-edge
duplexing (Option 1), type:
&%Z60,2\Z66,0\Z33,1
To ensure that the configuration
is correct, review and, if necessary,
modify at least the following
configuration options.