21
CHAPTER 4: Configuration
Figure 4. Plug Parameters Menu (Plug 1 Shown).
1.
Plug Name:
(Up to 16 Characters) Assigns a name to the plug. Typically the
name describes the equipment connected to the outlet. When names are
assigned to plugs, Boot/On/Off commands can be invoked using the name or
number of the desired plug.
2.
Password:
(Up to 16 Characters) Assigns a User Password to this plug. The
selected plug is then “owned” by that User Password. When the password is
entered at the password prompt, you’ll have access to this plug and all other
plugs owned by this password.
NOTE
If the System Password is defined, and the plug’s User Password is not
defined, then the System Password will “own” this plug, and only the
System Mode will be able to control the plug.
3.
Boot Delay:
During a Boot operation, power to the plug is first switched off
and then switched back on. The Boot Delay is the length of time that elapses
between the time when power is switched off and the time when power is
restored. The Boot Delay can be 1, 5, 10, 15, 30, or 60 seconds. (Default is 5 or
10 seconds, selected by Option Switch 2.)
4.
Power-Up Default:
Determines how this plug will react when the /D (default)
command is invoked, or after a power interruption. Each plug can be
automatically switched On or Off as specified by the Power-Up Default.
After Plug Parameters have been defined, press
[Esc]
to return to the NPS>
command prompt.
PLUG #1 PARAMETERS:
1.
Plug Name:
(undefined)
2.
Password:
(undefined)
3.
Boot Delay:
5 Sec
4.
Power Up Default:
On
Enter Selection or <ESC> to Exit...
Содержание SWI069A
Страница 3: ......
