18
NETWORK POWER SWITCH
4.3 Network Power Switch Command/Menu Conventions
When invoking Network Power Switch commands and selecting items from
configuration menus, note that:
• All Network Power Switch commands can be invoked at the NPS> command
prompt, or from the General Parameters Menu, Port Parameters Menus, or
Network Parameters Menu.
• Network Power Switch commands are
not
case-sensitive. All Network Power
Switch commands are invoked by pressing
[Enter]
.
• To select an item from a Network Power Switch menu, key in the number for
the item and press
[Enter]
.
• To exit from a menu, press
[Esc]
at any time. Parameters defined up to that
point will be saved.
• To display the Help Screen, type
/H
and press
[Enter]
.
4.4 Defining General Parameters
When the “NPS>” prompt appears, type
/G
and press
[Enter]
to display the
General Parameters menu (Figure 3). Note that this menu is not available in User
Mode. The General Parameters menu offers:
1.
System Password
(up to 16 characters, case-sensitive): When the System
Password is defined, the Network Power Switch will display a prompt before
allowing access to command mode. If the System Password is entered, the
Network Power Switch will start up in System Mode. To define the System
Password, type
1
and press
[Enter]
.
NOTE
If the System Password is not defined, the password prompt will not be
displayed, and the Network Power Switch will always start up in System
Mode.
2.
Site ID:
Defines a text string (up to 32 characters) that denotes the installation
site. To define the Site ID, type
2
and press
[Enter]
.
Содержание SWI069A
Страница 3: ......
