32
NETWORK POWER SWITCH
3. Upload the file with the saved parameters. If necessary, key in the file name
and directory path.
4. When the upload is complete, make certain to terminate the communications
program’s upload mode.
NOTE
The current On/Off status of each Network Power Switch plug will not be
saved or restored. However, the selected default On/Off setting for each
plug will be saved and restored.
When the configuration file is sent to the Network Power Switch via
telnet, the unit’s IP Address, Subnet Mask, and Gateway Address cannot
be altered.
5. Type
/SP
and press
[Enter]
. The Network Power Switch will display the Status
Screen with passwords revealed. Check the Status Screen to make certain that
saved parameters have been restored.
Содержание SWI069A
Страница 3: ......