®
Standard hotkeys
The range of hotkey combinations are as follows:
Note: If your hotkeys have been changed, substitute them for
and
in
the examples given here.
Selects port 1
Selects port 2
•
•
•
•
then
Selects port 10
Note: When entering multiple digit addresses as
above or for even longer cascaded computers,
keep
and
pressed down until all other
numbers have been entered.
Selects the next available port
Selects autoscan mode where each (authorized)
port is displayed for a period determined by
the administrator. To cancel autoscan mode,
simply select any fixed channel using any of the
suggested methods.
Switches off the video signal – this will cause
a power saving monitor to enter its standby
mode. To awaken the monitor, simply select
any fixed channel using any of the suggested
methods.
Logs out the current user (if security is enabled)
or selects port 0 to disable the video signal (if
security is disabled).
& , , or
Moves the currently displayed on-screen menu
around the screen.
To select a computer using the on-screen menu
1 Select the on-screen menu in one of two ways:
• By simultaneously pressing and then releasing
, or
• By pressing the middle and right buttons of a three button mouse.
Note: The mouse switching option is usable only if the ‘Mouse
Switching’ option is enabled. See
Global preferences
for more details.
At this point, depending on the security settings and the current log in
situation, one of two things will be displayed, either the login screen, or the
Selection menu:
2 Use the and keys (or the scroll wheel of an IntelliMouse) to highlight
the required computer name. Alternatively (for large configurations), press
to perform an alphabetical search for a particular port name.
Note: If security has been enabled then only computers to which the current
user port has permission will be displayed.
3 Press
to select the highlighted port.
SERVSWITCH CX UNO
Computer
Port
Computer 1
01
Computer 2
02
Computer 3
03
Computer 4
04
Computer 5
05
Computer 6
06
Computer 7
07
Computer 8
08
User
Status
ADMIN
SHARED USE
F1-More menus
F3-Find
Esc-Quit
F4-Logout
The Selection Menu
– here you can
select computers by name.
