manualshive.com logo in svg

Black Box PSE544-DE-R2, Руководство пользователя

Поделиться
Скачать
Black Box PSE544-DE-R2 Скачать руководство пользователя страница 18

18

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

FIGURE 3-5: TRIGGER

Trigger Server enabled

Check this box if you want to enable the Trigger function.

NOTE:  The Trigger function must be activated on both the emitter device (your device) and the target device (the 
remote Power Switch).

Trigger Port

This field stores the port number used by the Trigger function. The default port is 52389.

NOTE: The Trigger function must be activated on both the emitter device (your device) and the target device (the 
remote Power Switch).

LOGOUT

Click “Logout” at the bottom of the page to exit the session without saving changes.

DISCARD CHANGES

Click “Discard Changes” at the bottom of the page to discard all of the changes that you have made on this page.

APPLY CHANGES

Click “Apply Changes” at the bottom of the page to save changes.

CHAPTER 3: NETWORK SETTINGS

Содержание PSE544-DE-R2





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды