manualshive.com logo in svg

Black Box PSE544-DE-R2, Руководство пользователя

Поделиться
Скачать
Black Box PSE544-DE-R2 Скачать руководство пользователя страница 12

12

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

3.1.4 GENERAL / IP CONFIGURATION

This page enables you to define the PSE544’s IP parameters.

FIGURE 3-2: IP CONFIGURATION

DHCP Client enabled:

Check this box if you want to obtain the IP address, the subnet mask, and the default gateway for your PSE544 via 
DHCP. The default setting for this option is disabled.

NOTE:  Use of DHCP (Dynamic Host Configuration Protocol) requires a DHCP host to be set up on the network.

IP Address:

 

 

 

IP address of the PSE544; default is 192.168.100.200.

Subnet Mask:

   

 

Subnet Mask of the PSE544; default is 255.255.255.0.

Default Gateway:

 

 

Generally, the address of your router; default is blank.

Primary DNS Address:

   

Primary DNS (Domain Name Server); default is blank

Secondary DNS Address:

 

Secondary DNS; default is blank

Finder Program enabled:

The Network parameters of the PSE544 can also be configured through a Local Area Network using the provided 
Finder Program. It is a very simple and fast configuration method if you use the Windows operating system.

NOTE:  The Finder Program is enabled by default.
NOTE:  For security reasons, deactivate the Finder program after the first configuration.

HTTP Port:

This field stores the port number; the default is 80.

CHAPTER 3: NETWORK SETTINGS

Содержание PSE544-DE-R2





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды